SMC Process
Mix the resins, fillers and other materials well to form a resin paste, apply the paste on a first film, disperse chopped glass fibers evenly on the resin paste film and cover this paste film with another layer of resin paste film, and then compact the two paste films with pressure rollers of a SMC machine unit to form sheet molding compound products.
SMC Roving
Assembled Rovings for SMC are compatible with UP and VE. They deliver properties of good choppability and dispersion, low fuzz, good wet-out and good antistatic performance.
Product Features
1.SMC sanitary products with high boiling resistance.（Unit bathroom）
2.General purpose SMC products.（Automobie parts electrcal parts, buiding decoration,etc）
3.SMC products with high surface quality and easy coloring.（Waterproof board, water tank, electrical cabinet,etc）
4.SMC structural parts with high strength and high glass fiber content.（ Automobile structural parts）
5.SMC products with Grade-A surface.（Automobile exterior parts）
6. SMC products with high suface quality and easy coloring.（Bathroom wares）
End-Use Markets
(Building and Construction / Chemical / Consumer Goods and Business Equipment / Automotive / Electrical and Electronics / Infrastructure / Sports and Leisure )
Product Data
Performance requirements | Linear density（%） | Moisture content（%） | Combustible content（%） | Stiffness（mm） |
Test Methods | ISO1889 | ISO3344 | ISO1887 | ISO3375 |
2400TEX | ±5 | ≤0.15 | 1.25±0.15 | 160±15 |
4400TEX | ||||
4800TEX |
*Special specifications can be produced according to customer requirements.
Packing
Each outer layer of plastic film heat shrinkable yarn groups, each tray is put three or four, 48 volumes, or 64 volume is a large cardboard box on the tray.
Storage
In the absence of special circumstances required stored in a dry, cool place, to prevent rain. 24 hours is recommended to keep the indoor temperature balance. It recommends controlling the temperature 15 ℃ ~ 35 ℃, humidity 35% to 65%